Everything Totally Explained


Ask & we'll explain, totally!
Scale (map)
Totally Explained


  NEW! All the latest news in the worlds of computer gaming, entertainment, the environment,  
finance, health, politics, science, stocks & shares, technology and much, much, more.  


View this entry using RSS

Everything about Scale Map totally explained

The scale of a map is the ratio of a single unit of distance on the map to the equivalent distance on the ground. The scale can be expressed in four ways: as a ratio, a fraction, in words and as a graphical (bar) scale. A scale in words can be called a lexical scale.
   A scale expressed as a ratio of say 1:25,000 means that one unit on the map represents 25,000 units on the ground, ie 1 millimetre represents 25,000 mm, expressed better as 25 metres.
   The statement 'one millimetre represents 25 metres' is an expression of scale in words.
   Scale expressed as a fraction, 1/25,000, means that any distance on the map is 1/25,000 th the distance on the ground. It expresses the amount of reduction of distances used to represent detail on the map. The 25,000 value is called the scale denominator.
   Due to showing the curved surface of the earth on a flat map surface, the scale varies from place to place. Thus a representative fraction is stated for scale which is correct at the centre of the map and which varies elsewhere. While called representative fraction, it really is the representative ratio.
   A graphical (bar) scale is a ruler with ground distances added, included in the margin of most maps. The graphical scale is used to measure distances on the map. The distance on the map is marked on the edge of a sheet of paper, which is then placed over the graphical bar scale and the distance read.
   Maps are usually produced at standard scales of (say) 1:10,000, 1:25,000, 1:50,000, 1:100,000, 1:250,000, 1:500,000. The distance on the ground equals the distance measured on the map multiplied by the scale denominator.
    Calculation: Measure 466 mm on a map with scale 1:50,000 466 x 50,000 = 23,300,000 mm ie 23,300 metres ie 23.3 kilometres
   Some older maps use imperial units expressed in words, such as 60 chains to 1 inch or 2 miles to 1 inch, etc.
   In this case measure mm on the map and multiply by the scale factor below (where 1 yard = 36 inches, 1 chain = 22 yards) ...

40 chains = 1 inch >> 40 x 22 x 36 >> 1 : 31,680 (scale) 60 chains = 1 inch >> 60 x 22 x 36 >> 1 : 47,520 (scale) 1 mile = 1 inch >> 63,360 x 1 >> 1 : 63,360 (scale) 2 miles = 1 inch >> 63,360 x 2 >> 1 : 126,720 (scale) 4 miles = 1 inch >> 63,360 x 4 >> 1 : 253,440 (scale)
    Calculation: Measure 132 mm on a map with scale 60 chains to 1 inch 132 x 47,520 = 6272,640 millimetres ie 6,272.6 metres ie 6.27 kilometres
   Maps are sometimes referred to by relative descriptions of large scale or small scale. A large scale map displays objects so they appear relatively large. For example, an island displayed on a 1:10,000 map will appear larger than if displayed on a 1:100,000 map. Thus, the former is large scale. Maps with a ratio of 1:50,000 or larger (for example, 1:25,000 would be larger) are considered large scale. Maps with a ratio of 1:50,000 to 1:250,000 are considered medium scale. Any maps with a smaller scale (for example 1:500,000) are considered small scale. A trick to remember this sometimes unintuitive description schema is to remember that small scales have tiny ratio values (for example 1:500000 = 1/500000 = 0.000002) and large scales have larger ratio values (1:500 = 1/500 = 0.002).

Further Information

Get more info on 'Scale Map'.


External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

    <a href="http://scale__map.totallyexplained.com">Scale (map) Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
   As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.



Copyright © 2007-8 totallyexplained.com | Licensed under the GNU Free Documentation License | Site Map
This article contains text from the Wikipedia article Scale (map) (History) and is released under the GFDL | RSS Version